Passport & ID Photo Maker
Turn a phone picture into a passport or visa photo: pick the US, UK, Schengen, Canada, Australia, Hong Kong or one of several more, fit the head to the crown, eye and chin guides and check it against a millimetre ruler, let Auto adjust balance the light, swap an uneven wall for plain white or grey, and fix yellow light or one-sided shadows. Download the photo at up to 1200 DPI, or a 4R (4×6) print sheet at 300 or 600 DPI. No AI and no upload — the photo of your face never leaves your browser.
- Price:
- Free, no sign-up
- Data:
- Processed locally
- Reviewed:
Interactive id photo maker
Drop a portrait photo
Face the camera against a plain wall or door, in even daylight. The photo never leaves this tab.
No photo yet
Drop a head-and-shoulders photo above, pick your document, then line up the guides.
What size is a passport photo in pixels?
A US passport photo is 2×2 inches, which is 600×600 pixels at the 300 DPI printers expect, with the head 1 to 1⅜ inches from chin to crown. Schengen and UK photos are 35×45 mm, or 413×531 pixels at 300 DPI, with the head filling roughly 70 to 80% of the height. Four US photos or eight 35×45 mm photos fit on one 4×6 inch print.
How to use the id photo maker
- Add a photo: Drop a head-and-shoulders picture taken against a plain wall in even light.
- Pick the document: Choose your country — from 2×2 in and 35×45 mm to 40×50 mm and 50×70 mm — and size and guides switch instantly.
- Frame it: Press Fit head to guides, or drag, zoom and level by hand, and check the head height against the mm ruler.
- Fix backdrop and light: Press Auto adjust, or sample the wall yourself and tune exposure, warmth and a shadowed area by hand.
- Download or print: Save the single photo at 300 to 1200 DPI, or a 4R (4×6 in) sheet at 300 or 600 DPI with cut lines — one photo repeated, or several people and sizes mixed.
How the id photo maker works
How the photo is built
Each document preset fixes an output size at 300 DPI — 600×600 px for a 2×2 in US photo, 413×531 px for 35×45 mm — and a pair of ranges: head height from crown to chin as a share of the frame, and eye height measured from the bottom edge. The guides draw the middle of each range as a line and the full range as a tinted band, assuming the eyes sit halfway between crown and chin.
Framing
Your photo is drawn through one transform — translate to the frame centre plus your drag offset, rotate by the levelling angle, scale by the zoom — straight into the output frame. Very large phone photos are first reduced to 2048 px on the long edge, which is still several times the resolution any ID frame needs and keeps redraws fast.
Measuring and fitting the head
Millimetre rulers run along the preview at print size. The head is measured live from the finished frame: crown and width from where the outline leaves the wall colour, the chin from the strongest light-to-dark step below the mouth. Fit head to guides scales about the frame centre by the ratio of the target head height to the measured one, then shifts the photo so the crown lands on the crown line and the head is centred.
Requirement check
Under the photo, the common rejection reasons are checked live against the finished frame. Centred compares the measured head with the frame centre and the crown band. Shadow compares the two sides of the lower face and the wall beside the head. Too light and too dark count face pixels blown out to white or crushed to black — never how bright skin is, so a well-exposed dark complexion passes. Flash reflection looks for small blown-out hot spots. A glasses frame across the eyes, hair over the eyes or eyebrows, and expression cannot be judged from pixels without recognising a face, so those are left for you to tick.
Auto adjust
Auto adjust reads the same frame. The top corners give the wall colour, which sets white balance when it is close to grey. The darkest and brightest half-percent of pixels are stretched toward black and white, gently and only when the photo needs it. Cheeks more than 15% apart get an area lift on the darker side. The wall is replaced only when both corners agree and it sits well away from the skin tone. Skin is never pushed toward a set brightness, so no complexion gets "corrected", and one click undoes the lot.
Background keying
Every pixel is compared with the sampled wall colour by Euclidean distance in RGB. Below tolerance − feather it becomes the new backdrop, above tolerance + feather it is kept, and in between it blends on a smoothstep curve, so hair edges fade instead of cutting off. Lighting changes apply to you, not to the replaced backdrop, so white stays exactly #FFFFFF.
Lighting
- Warmth shifts red and blue in opposite directions to cancel a tungsten or fluorescent cast.
- Exposure and contrast scale each channel and its distance from mid-grey.
- Shadow lift adds a sine-shaped boost to dark and mid-dark pixels only, zero at pure black and at 60% luminance, so shadows open up without blowing out highlights.
- Shine works only inside the measured face and only on highlights above 55% brightness: it pulls them back down on a smooth ramp and blends them toward the skin colour sampled from the face's mid-tones, so a flash hot spot or an oily forehead turns back into skin instead of grey — and a white wall right beside the face is left exactly as it was.
- Area adjustment applies its own exposure, contrast, shadow lift and warmth inside an ellipse you drag over the photo, fading to nothing across a soft edge — for a face lit from one side, where a global change would brighten the lit half too.
The 4R print sheet
The sheet is 4R, or 4×6 in: 1200×1800 px at 300 DPI, or 2400×3600 px at 600 DPI, where every photo on it is re-rendered from the sharp copy of your original rather than enlarged. Photos of any mix of sizes are packed in rows, tallest first, in whichever orientation fits more — or the one you pick, with or without the label strip, so a 2×2 in photo fills the sheet as 2 × 3 or 3 × 2 — with leftover space spread evenly so every cut runs straight across. Each copy gets a 0.5 pt cut line and corner crop marks where there is room. Both downloads are JPEGs stamped with 300 DPI, so printing at actual size gives the real physical dimensions.
ID Photo Maker — frequently asked questions
No. The photo is decoded, cropped and re-coloured on a canvas in this tab, and the download is generated from that canvas. There is no server step, so a picture of your face never sits on someone else’s machine.
You click the wall with the eyedropper, and every pixel is compared with that colour by its distance in RGB space. Pixels within the tolerance become the new backdrop, pixels just beyond it blend across the feather band, and the rest are kept. It works well on a plain wall or door and poorly on a busy background, which is why the advice is to reshoot against something flat.
Download the 4R sheet and print it at 100% or "actual size" on 4R (4×6 in, 10×15 cm) photo paper — at home or at any pharmacy or photo kiosk. A 2×2 in US photo fits four to a sheet and a 35×45 mm photo fits eight. To share one print between family members or documents, add each finished photo to the sheet and set how many copies of each you need. Cut along the grey lines.
Against a plain wall the head stands out by colour. The crown is the first row where enough pixels differ from the wall, the width is the widest outline before it narrows into the neck, and the chin is the sharpest bright-to-dark step down the middle of the face, where skin meets the shadow under the chin. Crown and width are dependable on a plain wall; the chin is an estimate, so you can click it into place, and the millimetre readout updates as you frame.
Many authorities, including the US Department of State and HM Passport Office, reject photos that have been digitally altered beyond cropping and resizing. Background replacement and lighting changes may count as alteration. The safest photo needs no edits: plain light wall, even daylight, neutral expression. Use the corrections sparingly and check your authority’s current rules.
Official resources & government references
Verified references, primary standards specifications, and official publications governing the rules and calculations implemented in this tool:
U.S. Passport Photo Requirements
The official 2×2 inch size, head-height, background and editing rules for US passport photos.
Photos for Passports
UK printed and digital passport photo rules, including size, background and lighting.
Important Disclaimer
Guides follow published size and head-height ranges, but this tool cannot verify expression, focus, glare or likeness, and it does not guarantee acceptance. Issuing authorities decide what they accept, and several prohibit digital alteration beyond cropping. Check the official requirements before you submit or pay for an application.
Calculated & Verified by Makecade Financial Tools Editorial Team
Verified CalculationsOur calculations are engineered and continuously tested against official statutory standards from HM Revenue & Customs (HMRC) and the US Internal Revenue Service (IRS). Every formula runs purely client-side inside your browser session — zero personal or financial figures are ever collected, transmitted, or stored on any server.